第一壓鑄網首頁設為主頁
產品展示
產品中心
首頁 / 產品展示 / 產品中心

兩軸伺服噴霧機 WTP-XL

品牌:

vtyz

單價:

面議

最小起訂量:

1 臺

供貨總量:

1 臺

發貨期限:

自買家付款之日起天內發貨

更新日期:

長期有效

詳細信息

一、噴霧機的技術性能 

1.伺服電機采用日本YASKAWA馬達驅動,臺灣PHT行星減速機。

2.采用齒輪齒條傳動,對齒輪、齒條進行鍍鎳處理,防止生銹。增加對齒輪齒條的注油和吹氣功能,更良好的保證了設備的穩定及長期運行。

3.導軌采用韓國進口SBC高精度直線導軌,滑塊采用DD級(雙層)密封防塵,線軌表面特殊鍍鎳處理,提高了耐磨,耐腐蝕性。滑軌螺栓孔全部安裝導軌防塵蓋。可以在惡劣的環境中長期運行,結構采用雙導軌在下, XY軸運行速度可達1.5m/s以上進行平穩運行。

4.噴頭動、定模分層獨立控制,每個噴嘴可獨立精確調整噴霧量,噴嘴采用萬向節結構可在任意方向進行調整,噴嘴備有可彎式噴嘴及加長噴嘴可選,適合較復雜的模具。

5.伺服噴霧采用手持式觸摸屏,在觸摸屏人機界面上可自由編輯噴涂步驟,參數設定一目了然,并帶有故障自診斷顯示功能,使用與維修都極為方便。

6.噴霧機在噴霧時可同時作上下前后運動,可設定浮動噴涂,定點噴涂。噴頭設有獨立的強力吹氣管,可有效清理模具上方殘留物。

7.噴嘴具有清洗功能,防止長期停用時涂料堵塞噴嘴。

8.伺服噴霧機具有模組存儲功能,更換模具時只需要輸入相應的模具編號即可讀取參數,避免重復參數設定而浪費時間。

9.具有前后待機功能,噴頭提前在待機位等待,提高生產效率。

二、 技術參數Technical Parameters

 


機型
Model
WTP-XL1#
WTP-XL2#
WTP-XL3#
WTP-XL4#
WTP-XL5#
WTP-XL6#
WTP-XL7#
適用壓鑄機
Applicable die casting machine
125T-200T
250T-400T
500T-580T
630T-900T
1000T-1250T
1600T-2000T
2500T-3000T
噴頭組噴霧形式
Spraying Mode of nozzle set
動、定模各二層噴霧、總噴霧位置24
2 layers spray each for moving and fixed moulds, 24 spraying positions in total
動、定模各二層噴霧、總噴霧位置28
2 layers spray each for moving and fixed moulds, 28 spraying positions in total
動、定模各二層噴霧、總噴霧位置32
2 layers spray each for moving and fixed moulds, 32 spraying positions in total
動、定模各二層噴霧、總噴霧位置36
2 layers spray each for moving and fixed moulds, 36 spraying positions in total
動、定模各三層噴霧、總噴霧位置78
3 layers spray each for moving and fixed moulds, 78 spraying positions in total
動、定模各三層噴霧、總噴霧位置90
3 layers spray each for moving and fixed moulds, 90 spraying positions in total
動、定模各三層噴霧、總噴霧位置102
3 layers spray each for moving and fixed moulds, 102 spraying positions in total
噴頭組所配噴嘴數量
Nozzle numbers of nozzle set
所配噴嘴總數為12個、動定模各6個、其余12個用捫蓋
12 nozzles in total, 6 nozzles for moving and fixed moulds each, the remaining 12 are with cap
所配噴嘴總數為14個、動定模各7個、其余14個用捫蓋
14 nozzles in total, 7 nozzles for moving and fixed moulds each, the remaining 14 are with cap
所配噴嘴總數為18個、動定模各9個、其余14個用捫蓋
18 nozzles in total, 9 nozzles for moving and fixed moulds each, the remaining 14 are with cap
所配噴嘴總數為26個、動定模各13個,其余10個用捫蓋
26 nozzles in total, 13 nozzles for moving and fixed moulds each, the remaining 10 are with cap
所配噴嘴總數為50個、動定模各25個、其余28個用捫蓋
50 nozzles in total, 25 nozzles for moving and fixed moulds each, the remaining 28 are with cap
所配噴嘴總數為60個、動定模各30個、其余30個用捫蓋
60 nozzles in total, 30 nozzles for moving and fixed moulds each, the remaining 30 are with cap
所配噴嘴總數為70個、動定模各35個、其余32個用捫蓋
70 nozzles in total, 35 nozzles for moving and fixed moulds each, the remaining 32 are with cap
噴頭組強力吹氣(銅管φ6*60mm
Strong blowing of nozzle set (Copper tube φ6*60mm)
吹氣總數為12個、動定模各6
12 blowing in total, 6 blowing for moving and fixed moulds each
吹氣總數為14個、動定模各7
14 blowing in total, 7 blowing for moving and fixed moulds each
吹氣總數為16個、動定模各8
16 blowing in total, 8 blowing for moving and fixed moulds each
吹氣總數為18個、動定模各9
18 blowing in total, 9 blowing for moving and fixed moulds each
吹氣總數為26個、動定模各13
26 blowing in total, 13 blowing for moving and fixed moulds each
吹氣總數為30個、動定模各15
30 blowing in total, 15 blowing for moving and fixed moulds each
吹氣總數為34個、動定模各17
34 blowing in total, 17 blowing for moving and fixed moulds each
噴頭組控制單元
Control Unit of nozzle set
按層控制,每層為一個控制單元,總共4個單元
Controlled by layers, each layer as a control unit, 4 units in total
按層控制,每層為一個控制單元,總共6個單元
Controlled by layers, each layer as a control unit, 6 units in total
供氣壓力
Air Supply pressure
6 kgf/cm²
水源壓力
Water Supply pressure
3kgf/cm²
離型劑接管口徑
Release Agent Connection Tube Caliber
PT 1/2
PT 1/2
PT 1/2
PT 1/2
PT3/4
PT 3/4
PT 3/4
控制氣源接口
Control air source interface
3/8
3/8
3/8
3/8
3/8
3/8
3/8
氣源接口
Air Supply Interface
1
1
1
1
2
2
2
縱向行程
Longitudinal Travel
700mm
800mm
1100mm
1200mm
1500mm
1700mm
1900mm
橫向行程
Transverse Travel
650mm
750mm
900mm
1100mm
1300mm
1450mm
1650mm
上升速度
Ascending speed
2m/ sec
2m/ sec
1.5m/ sec
1.5m/ sec
1.5m/ sec
1.5m/ sec
1.5m/ sec
下降速度
Descending Speed
2 m/ sec
2 m/ sec
1.5 m/ sec
1.5 m/ sec
1.5 m/ sec
1.5 m/ sec
1.5 m/ sec
外形尺(mm
Outline Dimension
1265*700*1700
1365*900*1900
1665*950*2300
1765*1000*2400
2300*1185*2900
2400*1235*3100
2600*1285*3300
裸機重量(Kg)
Weight of machine
330
355
380
400
785
830
900

附噴霧機外形尺寸圖

 
規格/機型
Specification/mode
WTP-XL1# WTP-XL2# WTP-XL3# WTP-XL4# WTP-XL5# WTP-XL6# WTP-XL7#
適用壓鑄機型
Applicable model of die-casting machine
125T-200T    
250T-400T
 
  
500T-580T
   
630T-900T    
1000T-1250T
   
1600T-2000T 2500T-3000T
A  650  850  1150  1350  1600  1800  2000
B  650  750  900  1150  1400  1500  1700
C  80  80  80  80  100  100  120
D  900  900  900  900  900  900  900
E  1230  1230  1230  1230  1600  1600  1600
F  1265  1365  1665  1765  2300  2400  2600
H  1700  1900  2300  2400  2900  3100  3300
K  353  353  353  353  610  610  610

在線詢價
相關評論
双色球红球振幅第三位走势图